Alien UFO Wall Light Spaceship - Creative STL 3D print model

Alien UFO Wall Light Spaceship - Creative STL

No Supports required.Easy LED Instalation (guide included).

• Includes:
• Two UFO Spaceship (closed and open)
• Two Pilots: Cow and Alien
• Four abducted characters (cow, alien, human a, human b)
• A guide to assembly the LED and wiring.

You CAN: resell the printed model.You CAN'T: resell or redestribute the STL file.

Feel free to create any composition you'd like, and here are the possibilities:

• Closed UFO abducting alien, cow, human or nothing.
• UFO with Cow Pilot abducting Aliens.
• UFO with Alien pilot abducting cow, human, another alien or nothing.

If you use the Pilot version, you don't need to glue the pilot on the ship, you can only place it there, and change it anytime you want for another pilot :)

You can PAINT the model as you prefer, creating your unique colors for cow, alien, ufo, etc. Or create your own variation if you willing to sell the printed models.

You can change the Infill settings for a more or less transparent spaceship.You can place it straight on a wall, or use a double-side tape that leaves a small space , placing it a bit more far from the wall, creating a light board around the ship.

All STL included sizes pre-set:

• ufo01_spaceship_closed: 200x100x85mm
• ufo02_spaceship: 200x100x59mm
• ufo02_alien_pilot: 47x34x20mm
• ufo02_cow_pilot: 50x48x32mm
• abducted_character_alien: 45x19x3mm
• abducted_character_cow: 33x27x4mm
• abducted_character_human_base: 30x34x3,5mm
• abducted_character_human_curve: 31x20x3mm

Feel free to resize as you prefer, but please, consider that switcher size will change aswell.

Used this Cura settings on my Ender 3 Pro, printing in PLA:-NO Supportes Required.-Dynamic Quality: 0.16mm-Printing Temperature: 230-Build Plate Temperature: 65-Speed: 40 mm/s (used 35 for the abducted miniatures)-Build Plate Adhesion Type: Brim (used Skirt for abducted miniatures)-Infill: 0% (this you can change as you prefer, 0% will be a bit more transparent, which is the one I made on images, but you can use 20% for a more resistent model and less transparent)-Retraction: feel free to use the one thats works better for your printer.But feel free to change and use the settings you prefer.Didn't test it on a resin printer, or in ABS.

Feel free to message me if you have any questions or difficulties, and feel free to share with me your creations, I would love to see and share :)