These models are cookie cutters to be 3D printed. They come in two options:-one piece cookie cutters. Simple, great for kids as they can squeeze it all the way to the bottom without worrying about cutting too deep. Recommended if you don’t want to mess with it too much.-two part cookie cutters – the cutting part and the stamping part is separate. Great if you’re making a dough that is very thick or very thin. You can be sure that the inside lines will be visible on the cookies nicely.
Cookie cutters included:The Mandalorian‘s HelmetThe Blacksmith’s HelmetBaby Yoda smilingBaby Yoda memeBlurrgMandalorian symbolBeskar Steel barMudhorn Egg
The thickness of the wall is 1mm and the offset of the imprint is 3mm. You can scale it a bit down or up if you have a smaller nozzle or print them with one perimeter and also choose to stop the print sooner if you want to make very thin cookies with the imprint.Files contain stl cookie cutters as shown on the pictures. This model is fan-made.
SCALEAt 100% scale the cookies are on average 65mm wide.You can scale the models as you like but have in mind that at 100% scale the walls are 1mm thin.
PRINTER SETTINGSI recommend a layer height of 0.2 - 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. None of the parts need printing supports. Printing settings will vary greatly depending on your specific printer.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic.Here are some links to our website and social media where you can see more of our creations:
https://3d-mon.com/links/
