NAMELED SMART AND LOGO - LED LAMP WITH NAME 3D print model

A modular lamp that can have integrated LED strips. You can choose a control system with a command or even via WI-FI on your mobile phone. Print all the letters separately, so it fits well on a normal printer, and then glued with plastic glue on the identified inserts in a very simple way. The letter covers are printed on a clear material, which is translucent and illuminates. Cover parts are not glued, they are just fitted.

Leds must be glued to the inner wall of the letters and pass between them in the existing holes. The entire printing is prepared with printing clearances, so that there are no problems.

One letter have diferent versions, to allow different electrical connections. An existing hole on the side, behind, support for command with 3 buttons or even without a hole to be able to drill wherever you want, or even use the letters only as an ornament, without light.

Size: 93cm height 24 cm Width

CUSTOMIZING ANOTHER NAME If you want another personalized name with a Nameled lamp, contact by email to cult3ddesign@gmail.com and indicate the name you want. The name will be quickly created to be able to print.

3D PRINTING SETTINGS Infill - 8% Height - 0.3mm ( nozzle 4mm ) or 0,4mm ( nozzle 6mm - preferred ) Black or Any color for letters, white color for covers.

3D PRINTING SETTINGS Summary of Assembly Steps:

1. Print letter one by one (fit in your printer without problems)
2. Print letter covers one by one (white or translucent)
3. Glue the letters in the correct order and in the existing notch
4. Glue a led strip to the inner edge, passing through the channels (Led 5050 model).
5. Make an electrical connection according to the model you are going to use.
6. Press the covers in place (they have a tolerance)
7. Place on the table or hang
8. Enjoy the magic