Children enjoy counting the days until a significant event. This calendar, similar to a Christmas advent calendar, will help them count the days until Halloween.

The project is simple to print and assemble without using any glue. It requires minimal materials and a few hours of printing.

All parts are already placed in the correct position for printing.

Each color is set to a different height to allow for filament changes USING M600 G-CODE COMMAND. Personally, I recommend PrusaSlicer, which makes it damn easy to set colour change pauses, but of course you can do this with any other slicer. A multicolor printer is NOT necessary. Can be printed on any mono extruder 3d printer.

The whole project can be printed using printers with small bed because the file Base.stl, which is the largest part, measures less than 155x155mm.

I have also included files for BambuLabStudio and PrusaSlicer (*.3mf files). These files already contain all the parts and their respective layer changes.

Color sequence for the file BASE.STL(of course you can change the colors to your liking)

Purple > Red > Black > Yellow

Set the color change to these layers (based on a vertical definition of 0.2 mm)

Layer 0 (first color): PurpleLayer 6 (1.2mm) : RedLayer 9 (1.8mm) : blackLayer 12 (2.4mm) : Yellow (to the end of the print)

Color sequence for the file sequence:(of course you can change the colors to your liking)

Layer 0 (first color) : RedLayer 11 (2.2mm): Yellow