Supermario power-up coat hanger 3D print model

You need 3x M3 screws of 5-10mm to finalize the assembling. And of course a basic screw to put into you wall.

Enjoy !****Print Settings

Printer:Tizyx Evy

Rafts:No

Supports:No

Resolution:0.4mm nozzle - 0.2mm layer

Notes:The UCP files are pre-setup for a proper printing, especially to minimize the seam visibility.You can achieve all the colors with a dual-color printer + making the appropriate filament changes when required. In this case you may have to print elements separately. If you have a 4-color printer, that's even easier :) Just ungroup the elements and set the proper color to each model.

No support is required ! All the models are designed to be printable in the orientation they are provided.

After printing, it is a good idea to slightly sand the parts in contact with each other. They should slide smoothly.

Unlock full access to all my CGTrader products at a fraction of the price by joining my Patreon!Get exclusive deals, early access, and more while supporting my work—don't miss outhttps://patreon.com/Custom3DModelingServices