Gorilla piggy bank 3D print model

This is Alfred,

Alfred is a gorilla but also a piggy bank!You can put in your large and small coins or simply all your unused change.Your parts will be well kept with Alfred, but be careful not to get bitten when you want them back Alfred is often a bad-ass!Parts can be easily retrieved by unscrewing the flap underneath.

PLA Wood (Creality CR-10s) :For nozzle diameter 0.40 mmExtrusion multiplier: 0.95Extrusion width: 0.40 mmRetraction distance: 6.50 mmAdditional restart distance: - 0.20 mmVertical retraction elevator: 0.25 mmRetraction speed: 80 mm/sDisengagement distance: 0.20 mmMain layer height: 0.18 mmUpper solid layers: 4Solid layers inferior : 4Contour shells: 3Filling percentage: 8%.Overlap of the contour: 20%.Supports percentage fill: 20%.Substrate base layers: 2Media type: normalSupporting abutment resolution: 4 mmMaximum overhang angle: 45° (can be increased to 60°)Extruder temperature: 215°CHeated bed (optional): 60°CPrinting speed: 50 mm/sUnder contour speed: 50%.Under solid filling speed: 80%.Under speed of the support structure: 80%.