V2 5 RC CAR JLB CHEETAH DIY EDITION PREMIUM 3D print model

[¯`·..·[ V2.5 RC CAR 1:8 JLB CHEETAH DIY EDITION ]·..·´¯]

JLB V2.5 is the Updated version of the V2.0All parts are compatible between V2.0 and V2.5No need to reprint everything.

Upgrade by more Need :

• Front Hub carrier and steering cup hub(5mm stronger and better design)
• Absorber shock Towers(5mm lower)
• Lower and Upper arms(place for washers)
• All the Steering Ackerman system(more efficient/stronger)
• Servo Mount and Cover(5mm side)
• Link piece(if servo mount change)
• New protection plate
• Anti Roll bar (better design) and Rear mounts(only)
• Transmission cover(maximized)
• Motor mount (more stronger)

No changes or Minor changes :

• Chassis center section
• Chassis brace
• Arms mount rear and front
• Chassis differential housing and cover
• Bumpers(led reinforced ans place for screws lower arms)
• Rims 3.2p 2.2p 1.9p(more stronger)
• Receiver mount(slimer)
• Anti Roll front mounts (no changes)

OFFICIAL WEB SITE :

https://myshopkit.fr/

BUILD GUIDE :

https://docs.google.com/presentation/d/1jabhHdwHruR_a4ibou3fMm3Z3C0JivmusydT-Vo3oH4/edit?usp=sharing

BUILD VIDEO LINK :

https://youtu.be/ltlX8YH-RXE

NEEDS :

• TPU ( 500g )ArmsBumpers

• PLA Plus ( 1Kg )All the Rest

TOOLS :

Hallen H2.5mm(for M3 Screws) / H1.5(for Pinion) Long Nose Pliers ThreadLocker Grease Clamp Gaskets

HARDWARE STORE :

Rolling 6800ZZ ( X 8) Washers M3 ( X 100) Lock Nuts M3 ( X 100) Screws M3 x 5mm Hexa ( X 8) (MotorMount) M3 x 10mm Hexa ( X 8) (MotorMount) M3 x 12mm Hexa ( X 4) (Direction) M3 x 14mm Hexa ( X 3) (Direction) M3 x 16mm Hexa ( X 1) (Direction) M3 x 20mm Hexa ( X 60) (ALL THE REST) M3 x 35mm Hexa ( X 2) (Direction) M3 x 40mm Hexa ( X 24) (ARMS)

TAGS :

• JLB CHEETAH
• Ender 3 compatible
• PreOriented STL PARTS
• 3D Printed RC Car
• Ackermann Steering Compact System
• Full Metal transmission
• Brushless Motor 2850 up to 4268 (3650 recommended) (soon 4985 and 5687 $$$)
• 3S -4S - 6S
• DUAL3S => 6S / DUAL4S => 8S / DUAL6S => 12S (soon DUAL8S => 16S $$$)
• ESP Front Gyroscope
• Pinion and Gearing 0.8 Module (32 Diametral Pitch) - No cogging issues
• Metal Differential mechanism Central axis Central drive shaft Motor-Gear
• Printed Beadlock Rims 2.2p or 3.2p -No Balooning issues for 3.2p
• Strong modulable design easy replace
• Standarts pieces
• 4 Arms = 1 Arm (Lowers and Uppers)
• 4WD -2WD -4x4 -2x4
• With or Without Anti roll Bar
• 1:8 Hardware
• No Glue Only M3 Screws Washers and LockNuts
• LED Light System Front and Rear
• Drift
• GoPro Mount

TAGS:

RC car, jlb, 1:8, 4WD, Ender3, CHEETAH