Rear Arms Bulkhead 2WD Circuit Ruckus Torment 70462 3D print model

I really liked the front A-Arms that intashu designed, but I found out that he didn't make ones for the rear A-Arms, so i CAD'd up my own, I designed them to be very thick and durable so these hopefully won't ever break like the last ones did. I installed this on my ECX Torment and it worked flawlessly, the 100% infill 95A TPU allows me to take this on crazy jumps and ram it into walls at max speed without worrying about breaking this part because it only bends, not snaps.

Over time, the rear A-arms and suspension on my RC car became brittle with age. I took it out on a dirt bike jump a little too big for the old RC car and the front and back suspension A-ARMS snapped cleanly apart, I designed this STL file in Fusion 360 to bring my car back to life—and now you can too!

You should probably print this with TPU because TPU aint brittle like PLA is and any impact that would break or bend some other material, TPU will just take like a champ!

(ORCASLICER)

Supports: Yes (Auto)

Support Angle: 10 degrees

Infill: 100%

PRINT WITH 95A TPU FOR DURABILITY