DJI Mavic 3 Battery Holder 3D print model

The DJI Mavic 3 typically flies up to 5 km or for 30 minutes. You can extend its flight range with this device, which allows you to attach an additional battery on top while efficiently distributing the weight. The battery consists of five 21700 cells. The schematic is included in the package.

Print settingsFilament PETG.0.6mm nozzle: 0.5mm layer height, 0.8mm layer width, printing with external perimeters, printing speed 80 mm/s. The printing time is 30 minutes. 0.4mm nozzle: layer height 0.35 mm, layer width 0.6 mm, printing with external perimeters, printing speed 80 mm/s. The printing time is 1 hour and 10 minutes.

The list of necessary materials for manufacturing the battery of the DJI Mavic 3 drone

1 21700 battery, high current, 5000mAh – 5 pcs.2 DJI Mavic 3 Standard battery – 1 pc.3 HT60 power connector – 2 pcs.4 5S balancing connector (6 pins) – 1 pc.5 Wire AWG12 red and black 25cm each.6 Wire AWG16 red and black 15 cm each.7 Solder PIC-40 2 mm – 25 cm8 Battery soldering flux – 5 grams.9 Wire soldering flux – 5 grams10 Soldering iron 80 W with a large stinger – 1 pc.11 Heat shrinkable tube d 8mm red and black – 10cm each.12 PETG filament d 1.75 mm – 12.65 m. (0.04 parts of 1 kg coil)13 Charger for 5S – 1 pc.