Crawler 4320 V2 Single Cab - 1-10 RC body 3D print model

Please note the expedition suite, logging bed, crane, tyre carrier and trailer in the pictures are SOLD SEPARATELY.

In the past, we released the 4320 Dual and Single Cab, which quickly became one of our most popular 3D models, thanks to your support! Since then, we've received a wealth of feedback on what you’d like to see in these designs.Taking all of this into account, we went back to the drawing board and completely re-engineered the model from the ground up. We’ve decided to focus on 4 major improvements to implement over the old design:Increase durability, have better parts replaceability, simplify printing and assembly process, and deliver more features.The overall look has been kept as close to the original as possible, but ~90% of the parts have been modified and redesigned. Almost none of the parts can be cross used with the original 4320 body. Scale and size are the same as before though, so the new cab can still be used for the series of 4320 expedition suites.

Tyre outer diameter: 120mmOuter tyre to tyre width: 230mm (use wider for more capable and aggressive stance)

Body mounts for SCX10 ii, VS4-10 Pro, SCX10 iii (and basecamp), TRX4, TRX6 are included. These mounts are bolted directly into the chassis rails. Please provide your own screws. Mount thickness is 8.5mm. Please also note that any inner fenders need to be removed or modified. TRX4, TRX6, fender integrated shock towers, please use aftermarket shock towers.

Some features and details included:Short nose and long nose versionsShort nose specific snorkelLong nose specific snorkelFunctional door and bonnet hingesMagnet latched doorsMagnet latched bonnetDetailed dashboard, steering wheel and columnImproved cab to roof mountingThicker and stronger A pillarsNew screw mounted front and main cab section for easier assembling and replaceabilityNew screw mounting method for grille for better durability, easier replaceability, better cab front structural rigidityShort nose and long nose bumpersIntegrated bumper mounts makes mounting bumpers much easierCrane bumper includedUpdated cab side grille mounting method for much easier printing and assemblyFully functional light bucketsLarger diameter mirror armsSimplified mirror mountingWipersStronger and easier to print bonnet latch handlesMerged fender and front section of cab for more flush mounting and easier printing

The old version of the cab is still included and downloadable if you want to experiment or for printing parts for repairs.

Be sure to check out the instruction manual and gather all required hardware for assembly.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual