Vigilante Deku Damaged Mask 3D print model

THIS IS NOT A PHYSICAL PRODUCT PLEASE READ DESCRIPTION!!!!

This is Vigilante Deku Mask 3d print. When you purchase this product you will be able to download the top and bottom part of the mask. The top part is in STL format and the bottom half comes in STL (which is not scaled to the mask size) and Gcode which is scaled to the top part of the mask so it fits properly and it also comes with the bottom part in an mf file for Ultimaker Cura. This model was made to fit peoples face for cosplay.

NOTE: I DO NOT do any 3d file alterations such as resizing, file format changing, or file splicing. It is up to the buyer to make those alterations themselves.

Recommendations:

-Print with TPU filament for a more comfortable fit (You could also use any other filament but TPU is recommended)

-Print on a CR-10 or any printer with a 300x300x300 for ease of use (You could print on smaller printers but you would need to splice models. I have not tried on resin printers so try at your own risk.)

-Use magnets to connect top and bottom half of the models once you print them (Do this to slide it on and off with ease)

-Use Ultimaker Cura for ease of use