Universal Flashlight Mount for Bicycles 3D print model

With two zip tie holes provided, any size of flashlight can be fitted.Use 5 mm zip ties.

You can use any M2 screw of sufficient length to secure the ring.Use a thin rubber sheet or double-sided tape between the bar and the ring to prevent slipping.

Printing Notes:

• No supports required except screw holes.
• Print with 2 outline perimeters and 100% infill.
• 0.1 to 0.2 mm layer height should be good.

Features:

• Curved zip tie paths prevent stress-whitening when tightened.
• Curved mounting surface aligns the flashlight straight.