Trumpet Mouthpiece Bach Bundle 3D print model

This bundle includes 7 3D printable models of trumpet mouthpieces made to the same spec as some of the most popular Bach mouthpieces. This bundle includes these models: Bach 1, Bach 1-1/4C, Bach1 1/2C, Bach 3C, Bach 3F, Bach 7C, and Bach 10-1/2C. Mouthpiece specs: Bach 1Inner Diameter-0.701Cup depth-0.472Throat-0.144Outer Diameter-1.070Overall Length-87.11

Bach 1-1/4CInner Diameter-0.693Cup depth-0.534Throat-0.147Outer Diameter-1.079Overall Length-87.27

Bach 1-1/2CInner Diameter-0.681Cup depth-0.489Throat-0.144Outer Diameter-1.070Overall Length-86.49

Bach 3CInner Diameter-0.671Cup depth-0.483Throat-0.145Outer Diameter-1.070Overall Length-86.49

Bach 3FInner Diameter-0.690Cup depth-0.404Throat-0.143Outer Diameter-1.074Overall Length-87.25

Bach 7CInner Diameter-0.681Cup depth-0.539Throat-0.144Outer Diameter-1.058Overall Length-86.49

Bach 10-1/2CInner Diameter-0.663Cup depth-0.537Throat-0.143Outer Diameter-1.052Overall Length-87.22

I recommend printing on a resin printer. I print them on a Photon Mono 4K at 0.050mm layer height or 0.020 for less post-print polishing.For best results sand the rim of your print until smooth using 1000, 1500, and 2000 grit sandpaper then polishing using beeswax or another safe polishing compound.