Threaded cane from Bloodborne game 3D print model

The famous cane from the game Bloodborne, in its cane version, without moving parts.

The cane is scaled 1:1 according to the proportions of the weapons in the game. Length 113 cm (44.5 inches). Handle size 13.8 cm (5.4 inches). The parts are assembled on a metal tube 8 mm in diameter, 92 cm long and a second short tube for the handle, 6 mm in diameter and about 20 cm long Thanks to this, the cane can be made collapsible. If you want to change the scale of the cane to make it shorter (and therefore more convenient) it is better not to scale all the details, but simply not print one of the parts (2, 3, 4 or 5). Or reduce their scale only along the Z axes (in length). Then the dimensions of the holes for the metal tube will be the same, and the handle will not decrease either, it is already small :)

The archive contains files of details as well as a file of the whole cane. The cane is divided into parts with the size conventional for the regular fdm printer 20x20x20 cm. For part files, there are variants with and without decorative elements included. There are also separate files of decorative elements. I prefer to print them separately, on a photopolymer printer.

For a full size cane you will need: Printing filament (depending on infill density) ~ 400gr When printing decorative details separately on a photopolymer printer - photopolymer resin ~ 11 gr two tubes, 8 mm (92 cm) in diameter and 6 mm (20 cm) in diameter A piece of reddish-brown fake leather for covering the part of the handle - about 10x15 cm