Symphonic Trumpet Mouthpiece Bundle 3D print model

This bundle includes a Small collection of printable trumpet mouthpieces well suited for symphonic trumpet playing. Included in this bundle are 7 models eqivalent to these mouthpieces: Bach1, Bach 1C, Bach 1-1/4C, Bach 1-1/2C, Bach 2, Tamaha John Hagstrom Model, and Yamaha Thomas Hooten Model.

Mouthpiece Specs:Bach 1Inner Diameter-0.701Cup depth-0.472Throat-0.144Outer Diameter-1.070Overall Length-87.11

Bach 1CInner Diameter-0.701Cup depth-0.472Throat-0.144Outer Diameter-1.070Overall Length-87.11

Bach 1-1/4CInner Diameter-0.693Cup depth-0.534Throat-0.147Outer Diameter-1.079Overall Length-87.27

Bach 1-1/2CInner Diameter-0.681Cup depth-0.489Throat-0.144Outer Diameter-1.070Overall Length-87.11

Bach 2Inner Diameter-0.665Cup depth-0.534Throat-0.146Outer Diameter-1.056Overall Length-87.12

Yamaha John HagstromInner Diameter- 0.684Outer Diameter- 1.083Throat- 0.158Overall Length-87.78

Yamaha Thomas HootenInner Diameter- 0.694Outer Diameter- 1.083Throat- 0.149Overall Length-87.52

I recommend printing on a resin printer. I print them on a Photon Mono 4K at 0.050mm layer height or 0.020 for less post-print polishing.For best results sand the rim of your print until smooth using 1000, 1500, and 2000 grit sandpaper then polishing using beeswax or another safe polishing compound.