3D print models (STL files) of the helmet for Yui, Spec Ops: Cat soldier, in collaboration with Willow Creative (https://twitter.com/WillowCreativ) The STL files were created using the original high resolution 3d model, then adjusted for the 3dprinter.The visor STL and a visor buck STL is included separately, in case you wish to mould or vacuum-form it for clear plastic material.

IMPORTANT: licensed Creative Commons – Non Commercial/No Derivatives (nc/nd)You are not licensed to sell 3dprint kits made using this STL, redistribute or adjust the digital files, unless for own use!

Printing instructions:Helmet print volume: 275x275x315If you need me to cut up the helmet to suit your 3dprinter volume, just email me!The STL files are ready to print, and are already oriented for an optimal 3d print result.All parts can be nicely printed using 3-4 walls and 15% infill and standard support settings, you could probably get away with no supports in the inside of the helmet.

Finishing instructions:The helmet is sized for 21-22 inch head circumference. Scale up 5% to 8% if closer to 23-24 inch head circumference.Use 150 grit sandpaper and filler primer spray to smooth a 3dprint before painting. Go up to 400-600 grit for a smoother result. Spraypaint can be used to paint any 3dprint, or other paints such as acrylics or airbrush.Filler primer spray works great to reduce sanding effort and fill 3dprint lines.

The 3d models are made by me. The file is packed in a zip file. This can be unpacked by most operating systems without the need of additional applications into your useable STL files. If you do not unpack them, the models will not work!

License information: You may not share, change and share, sell the digital files or sell 3D prints made with it. You may use the files for personal use and single-use commissions only. Attribution must be given at least once if your project is published, and used these files: mention Willow Creative and LeoSaurusRex in your project description.FILE HAS BEEN TEST PRINTED SUCCESFULLY