SdKfz 251 Ausf D 1to16 RC Halftrack 3D print model

Hello,

here is my my new Design of a German Sd.Kfz 251 Ausf. D

Its an Easyprint Model

Perhabs the first in this Scale to download and Print by yourself :-)

It Features a simple, but effective Suspension (1 Swingbar per Wheelpair)

What do you need for Assembly?

1mm Wire (Hingepins, Trackpins....)

2mm Rod

4mm Rod (Driveaxles)

3mm Brasspipe

4mm Brasspipe

5mm Brasspipe

M2,M3,M4 Screws (i always buy longer screws and fit them )

Nuts in equal sizes

M3x6 Grubscrews

Instantglue

Gearmotors

I did rudimentary manual for assembly.

If something is missing or is wrong, please leave a cmomment^^

Update 07.07.2023

To all pf ypu. I reworked some STL's of my design.

the lower is completly new designed to single wheel suspension. you need only 12 Ballpen Spring or some equal to make it work, plus sone m3 bolts to connect the parts

Wheels are reworked for easier building. Here you need M3 countersunk Screws and some 4mm Brass tube. separated wheel hub caps.

Tracklinks were reworked for easier building + a complette Tracklinks stl for the guys with resin printers

Upperhull was reworked with seperate fenders and working hatches ond the hood.

added a Radio and a tachometer for the driver compartment

Frontlights

reworkerd frontaxle

reworker Drivesprocket (for using a m3x50mm Hex bolt)

Swingarms with two different axle diameters to fit in the lower hull

new tool for glueing the Roadwheels

reworked Gerbox and Conegear with 10/14 teeth.

please take a look on the pictures. They are from my sd.KFZ. 250, but they share both the same system for the Suspension and lower hull construction

3D PRINTING SETTINGS too many

for Big Parts:

Res: 0,2mm

Supports

for Small Parts

Res: 0.1mm

support where it is needed.