M
mfluggen mfluggen
The file and the design was perfect and the print turned out very well. I used it on my Markforged printer with a nylon filament. Good job :-)
Cheers,
Markus
Useto navigate. Pressescto quit
PRINTABLE CONCRETE PLANTER MOLD M01 3D print model
Description
/ CONCRETE PLANTER MOLD /
- Easy to print.
- Easy to use.
- Perfect fit.
- Multiple inner molds.
- Durable.
These are the specifications I used to print it:
- Tested on a Prusa MK3s.
- 0.4mm Nozzle diameter.
- 0.3mm Layer height.
- PLA.
- No supports.
- Code numbers siding the heatbed.
- Print 3x of the 1-1 model.
Instructions for use
- Select the center you want to use.
- You can sand the contact surfaces. (Not fully necessary)
- Lubricate the molds. (Tested with cooking oil and worked perfectly)
- Fit all the parts together.
- You may use office clamps to get them tight.
- Pour the concrete up to the top.
- Shake lightly the mold (soft knocks on the table) so you get no air bubbles.
- Remove excess.
- Be patient! It takes around 24hs to get safe-dry.
- Unmold. First you take off the lateral parts and then the center one.
- Now you can sand the surface a little to get rid of any imperfection.
- You're done!
Now you should wash your molds, don't let too much concrete stick onto your pieces if you don't want to struggle on the next one.
Please visit my profile to find other models!
PRINTABLE CONCRETE PLANTER MOLD M01
Royalty Free License
PRINTABLE CONCRETE PLANTER MOLD M01
Royalty Free License
3D Model formats
Format limitations
- Stereolithography (.stl) (2 files)10.9 MB
- OBJ (.obj, .mtl) (2 files)9.95 MB
- amf (.amf) (2 files)14.1 MB
3D Model details
- Publish date2021-04-14
- Model ID#2984786
- Ready for 3D Printing
Similar Models
to PRINTABLE CONCRETE PLANTER MOLD M01
