Power Rangers Inspired Lost Galaxy Quasar Saber and Sheath 3D print model

This is a Power Rangers Lost Galaxy Quasar Saber and Sheath I was commissioned to make.

This was made to be as accurate as possible to the Tv show. Length:110cm, about43"Power Coins Sold Separately https://www.cgtrader.com/3d-print-models/hobby-diy/other/power-ranges-inspired-lost-galaxy-power-coins

1.- Two different Blades were madeOne is a collapsible blade like a toy light saber, The other is a fixed blade that can be used at either full or half length. Both use a 11mm wide dowel rod to be wielded. The hole messures 10.9mmIts recomened to line the inside of the Sheath and collapsible Blade halfs to avoid scrathing the prop.

2.- Foldable hand guardsThe hand guards were made to fold into the sheath.As shown in the renders

3.- Removable Power coinsCoins can be switched out to your favorite character. *Sold Separately *https://www.cgtrader.com/3d-print-models/hobby-diy/other/power-ranges-inspired-lost-galaxy-power-coins

4.- Mirror missing parts All parts marked with (L) OR (Half) at the end of its name can be mirrored to provide the missing right or bottom half. This can be done in your slicer of choice or alomost any 3d modeling program.

5.- Pieces marked with a number Any model marked with a number represents the amount you will need. I.E.- X4 Means you need to Print 4 of that Piece.

Enjoy