Model Railway Low Relief Industrial Building 1 Rear 3D print model

Low relief Industrial buildings are commonly used on model railways as back scenes and I thought these would be good to add to my collection of models. Many of these low relief industrial buildings you can buy generally are only about 5mm to 8mm deep, for many layouts people haven’t got a lot of room for a version that is any deeper. Some modellers do have the space so I have developed this design with different depths, 10mm, 40mm and 70mm (OO scale). The 40mm and 70mm versions will give more depth to your layout if you have got the space for these designs.

Also many industrial estates are made up of various designs of industrial buildings so I am designing various versions of industrial low relief buildings. I have also created versions for the front and rear of these buildings depending on where you situate these on your model railway. Some people may have them against to railway and therefor need the rears and other people may create a road scene with industrial building fronts.

These models have been designed to be printed on FDM printers but could also be printed on resin printers as long as the build area is large enough, resin maybe more suited for N scale. When printing these models you will need to add supports to support roofs and any over hangs.

This version is approx. 135mm wide and 80mm high in OO scale.

designed at OO gauge, 1/76.2 scale but can easily be scaled for other gauges.for HO gauge print at 87%, 1/87 Scale,for O gauge UK at 175%, 1/43.5 Scale,for O gauge International print at 158%, 1/48 Scale,for N gauge print at 51.49%, 1/148 Scale

The examples in the pictures were printed on a Bambu Labs A1 FDM Printer.As normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the look of the model too much.

For FDM printing I used a 0.4mm nozzle and a layer height of 0.12mm using PLA filament.

If you like my designs then please would you support me through my Patreon account - https://www.patreon.com/PJD1974, any money raised helps me research, design, and develop new items for me to share. For £1 a month, you will give me basic support and for £4 you will get insight into my new designs and be able to contribute to my future projects.

Please also check out my Website https://sites.google.com/view/pete3dprintinghelp/home