Model Railway Decorative Stone Balustrade with Pillars 3D print model

Balustrade stone detailing is commonly found on buildings, stations, bridges, and other similar locations.

I have also created a version of this item without pillars.

This is a design I have been meaning to do for a while and it has so many uses. The design consists of two lengths between pillars of 6ft (1.8m) and 12ft (3.6m) lengths and is approx. 3ft high (0.9m). Which equates to 24mm and 48mm long and 12mm high in OO. The pillars are just under 4ft high (1.2m) and in OO they are just under 16mm in height.

I have designed this as a kit with end pillars, 90-degree pillars, and end to end pillars (Please see photos), then the length sections fit between the pillars.

This item has been designed at OO gauge, 1/76.2 scale. For HO Gauge print at 87%, 1/87 Scale, For O Gauge UK print at 175%, 1/43.5 scale, For O Gauge International print at 158%, 1/48 scale, For TT Gauge print at 63.5%, 1/120 scale, For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not test printed this in N gauge scale).

The example in the pictures was printed on an AnyCubic Proton M3 3D resin printer. I recommend printing these on a 3D resin printer to get the best print definition. As per normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the look of the model too much.

The main resins I use for printing can be found with my affiliated links below. I use AnyCubic Water Washable Resin for most of my items but use AnyCubic ABS Like Resin for anything that needs to be stronger and tougher.

AnyCubic ABS like Resin https://amzn.to/3yRjgu4 (Amazon) AnyCubic Water Washable Resin https://amzn.to/3T3MgFY (Amazon)

If you like my designs then please would you support me through my Patreon account - https://www.patreon.com/PJD1974, any money raised helps me research, design, and develop new items for me to share. For £1 a month, you will give me basic support and for £4 you will get insight into my new designs and be able to contribute to my future projects.

If you would like a particular item that isn't listed here you can request for me to do a project for you via cgtrader.com. Please be realistic.

Please also check out my Website https://sites.google.com/view/pete3dprintinghelp/home