Model Railway Brick Arch Commercial Premises Add-on Component 3D print model

This is an add-on to my Model Railway Retaining Walls with Arches.https://www.cgtrader.com/3d-print-models/hobby-diy/other/model-railway-retaining-walls-with-arches-modular-design

also see Underpass Option Add-onhttps://www.cgtrader.com/3d-print-models/hobby-diy/other/model-railway-brick-arch-underpass-add-on-component

These items have been designed at 1/76 scale but can be printed at other scales.Primarily these items have been designed to be printed on a FDM printer but can also be printed on a Resin Printer.designed at OO gauge, 1/76.2 scale.for HO gauge print at 87%, 1/87 Scale,for O gauge UK at 175%, 1/43.5 Scale,for O gauge International print at 158%, 1/48 Scale,for N gauge print at 51.49%, 1/148 Scale, (Caution: I have not printed this model in N gauge so can’t guarantee its printability)

This is a group of several designs for commercial premises that are commonly found in railway arches, there are several designs to choose from and some of the shutter fronts are in the raised position so internal detail can be added. I have also included a back section for when commercial premises have doors open, this comes in two designs 51mm and 99mm deep.

The commercial premises are made up of a brick arch and a detailed infill for each type of commercial premises. Please see photos of all the different fronts. All Commercial Premisses fronts are designed to be printed inverted so supports are not required. I have also added some fronts with fronts open so you can add extra detail within the arch, to help with this I have added a arch infill that is either 51mm or 99mm deep.

The railway arch sections are 120mm (Single) / 240mm (Double) wide and are either 100m or 120mm tall. The arch front is about 9mm deep. These are designed to be printed inverted on an FDM printer, this way up they don’t need support.

These items are designed to be bought with my original design ‘Model Railway Retaining Walls with Arches’ which includes blank arches, end walls, and other associated items. Arches ending with 100 are 100mm tall, and those ending with 120 are 120mm tall. All the actual arches are the same size.

Additional InfoPlease check out my Website, https://sites.google.com/view/pete3dprintinghelp/homeMy website has lots of useful info.