MK V armor only 3d print files 3D print model

This is a fan made replica model, and neither myself nor this product is affiliated with Microsoft or 343 industries.

3d file in .stl format for 3d printing with all added detail from game textures.

Includes four file packs with armor for chest front and back, chest back and front lower, chest rig details, chest rig strap mounts, chest rig foam to suit pins (print in place), chest inner (for eva foam), chest lights (to be printed in something transparent), belt front, back, sides, sides front, sides back, belt strap slots, bicep outer, bicep inner, shoulder, shoulder light, forearm front, forearm back, forearm snap clips, forearm solid, hand armor standalone and for undersuit, thigh, thigh strap guides, knee armor standalone and for undersuit, shin back and front, 10.5 inch scaled boot, and a undersuit file for pepakura.

The chest of the suit has a middle foam core everything will attach onto. It is recommended to make the core out of eva foam and glue/attach onto the chest back. Both have slots on the top and back for 1.5in straps to slide through and attach together (like a backpack). The front of the chest slides on with a combination of friction mounts and 12, 15mm by 3mm neodymium magnets on the back and 12 on the front. There are also slots for two 80mm fans, sections to install lights, and slots for wire paths and batteries.

The bicep splits with the main segment having slots for a flexible printed or solid pla inner bicep.

The forearm splits in two halves attached together with clips. A strap slot holds the back of the forearm onto your forearm.

For the glove and knees there are two versions, one that sandwiches onto the undersuit and one that is for no undersuit.

The cod is fully segmented for flexibility and each part aligns together, having a 2inch slot run through them all for two elastic straps to slide through.

The shin splits with the front sliding off. It is recommended to use velcro strips to hold these together.

The boot files have been massively upgraded to now be a fully working 3d printable boot, with a inner shoe everything attaches onto. All boot parts scaled to a 10.5 inch foot, but can be re scaled to any foot size.

Armor files are scaled for a 5ft 10in individual, but highly recommended to re-scale each piece corresponding to your specific needs.

Any questions? Feel free to message me directly and please note the 3d model is for personal use only and is not meant to be sold to or sent to others. I also don't allow physical prints of my designs to be sold for a profit.