Mark VII Helmet Attachments CNM Fascinator and HUL-1 3D print model

Mark VII Cosplay Helmet 3D printing files.

Included in the order:

• CNM Fascinator attachment.
• HUL-1 Flashlight attachment.

A note with links to the components used is also included in case you want to replicate the working LED lights.

CNM Fascinator:

• All holes are made for M3 screws.If you want to use it for LEDs:
  
• Button used to power:https://www.amazon.com/dp/B075VBV4QH?psc=1&ref=ppx_yo2_dt_b_product_details
• LED's used: https://www.amazon.com/DiCUNO-450pcs-Colors-Emitting-Assorted/dp/B073QMYKDM/ref=sr_1_3?crid=3D5D36F5MCPYW&keywords=led+lights+3v&qid=1650032872&sprefix=led+lights+3v%2Caps%2C126&sr=8-3
  • I recommend using a 9V battery since it fits just fine inside, but any method works.
• Clear bits were printed in clear resin, but any diffusing material also works.
• In my case, I just connected a 9V battery in series with 3 LEDs and the push button. There are probably better ways to go about this with resistors and more lights but that's what worked for me :)

HUL-1 Flashlight attachment:If you want to add a flashlight, it is designed for this one:Streamlight 73001 Nano Light Miniature Keychain LED Flashlight, Black - 10 Lumenshttps://www.amazon.com/dp/B0011UIPIW?psc=1&ref=ppx_yo2_dt_b_product_details

Thank you so much for your support! If you have any questions or feedback feel free to reach out!

3D files are for personal use only.If you have any doubts or feedback feel free to reach out!

This item is fan art and not an officially licensed product.