gigi22
well done !!!
t is a model of the Liberator from "Blake's 7. The model made from 13 parts. All parts are fully adapted for 3D printing. Parts do not glue. They are only mechanically connected. 3D printing settings Wall thickness for all parts is 1.2 mm. Part 13 does not print. It is a piece of wire about 100 mm long and 3 mm thick. It shall be inserted in hole on the base 12 and hole on Part 5. Build Plate Adhesion: Raft (but with 0 raft top layers). Material PETG or PLA. Nozzle size 0.3 or 0.4 mm. layer height 0.15 mm. Top layers 6. Infill Density 20%.