Hoolheyak Staff from Arknights 3D print model

Update 1: CanAngleAdjust is an add-on to adjust the angle of the top cannister. Use a strong adhesive like epoxy resin and keep the cannister at as low weight as possible. Staff 0 is an add-on to increase the length of the staff section (Is optional). Neck2a and Neck2b are the white components that are inlaid into the neck of the prop.

This 3D model was designed for the purpose of 3D printing and cosplay. It was modeled after Ho'olheyak's staff from the mobile game Arknights. There are a lot of pieces so I highly recommend watching the embedded video that serves as a printing/assembly guide.

Use the embedded YouTube video as a guide. Please contact me either here or on my other social media if you have questions or encounter issues when using the 3D model.

Scale the model up by about 10x for proper sizing.

Infill: About 20% for the staff sections. Use a slightly lower infill for the head sections and higher infill for the neck sections.

Instagram: https://www.instagram.com/cosplay_made_design/YouTube: https://www.youtube.com/channel/UC9I3fI86BvZxYEdB0MHCeUQFor a commercial license: patreon.com/Cosplay_Made_Design