Deadpool Mask With Changable Lenses 3D Printable Model Fanmade 3D print model

Ready to print Deadpool Mask With Changable Lenses Fanmade 3D Model (digital file).

You can see my models after printing here: https://www.instagram.com/sonndersmith/

Listing contains four couples of lenses with different expressions. Base part of the mask and each lense assemble woth neodimium magnets (I recommend to use cylindrical magnets 8-10 mm in diameter and 4-6 mm in length). Every lense and base part has marking recesses for drilling holes for magnets. Also there is a couple of perforated lenses for pulling white fabric on it and putting it into eyeholes of lenses.

You need at least 220 x 210 x 200 mm build volume to print the mask. Contact me if your printer is smaller and I’ll split the files up according to your parameters.

Average wall thickness of each big part has an optimal value for resin casting: 4-5 mm.

I don’t mind if you’re going to sell masks made using my models, all I want from you is tagging me on Instagram in your relevant posts (@sonndersmith).

Listing contains:

• printable files of base in OBJ, STL and FBX format;
• printable files of 4 couples of lenses in OBJ format;
• printable files of all in one in STL and FBX format.

The mask model is scaled for an average 58 cm girth head, but the size could be changed if necessary.

Contact me if you have any questions.