Chainmail Dice Bag 3D print model

Create your own dice chain mail with 3d printing. (The images are real!!!)

This 3D model offers a chainmail patterned dice bag designed for seamless one-print assembly. Suitable for most 3D printers, it requires no additional parts post-printing. Whit this files you can print a chainmail dice bag very quickly in one single piece, all assembled.

VERY IMPORTANT It is imperative that both the general layer height and the first layer height are set to 0.3mm. The model is meticulously designed with this specific layer height in mind to ensure optimal adhesion among the rings and to the platform. Deviating from this set layer height could adversely affect the print's integrity, risking failure.

Printing Settings

• Filament Material: PLA
• Layer Resolution: 0.3 mm (ALL LAYERS INCLUDING FIRST)
• Infill Percentage: 15%
• Supports: No
• Brim: No
• Bed Temperature: 60°C
• Nozzle Temperature: 190°C
• Nozzle Size: 0.4mm
• Estimated Printing Time: Approximately 8 hours 10 minutes
• Print Volume: 126mm (width) x 87mm (depth) x 21mm (height)
• Printer Used: Prusa i3 MK3S
• Slicing Software Used: PrusaSlicer

Additional Information Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.