Bo Katan Kryze Full Armour 3D Print iles 3D print model

3D Print files for Bo-Katan Kryze Full Armour Set.

PLEASE NOTE: This is a digital 3D print file, not a physical prop.

The Rightful ruler of Mandalore herself; Bo Katan of Clan Kryze.

No expense has been spared for the accuracy and detail of these files. They’ve been over 2 months in the making.

The gauntlets are both clam shells joined by 6 x (4mm x 8mm cylindrical neodymium) magnets for ease of dressing. The left hand gauntlet has a hollow whistling birds and seperate keypad for you to add your own LED’s and electronics and also snaps on and off with 3 x magnets so you can change the battery.

The right hand gauntlet is extra special as it has a fully working spring loaded wrist blade! It requires a 100mm (free length ) compressed spring for the main mechanism and a smaller 10mm (free length) spring for the release button.

All smaller Antennas are seperate for higher detail printing.

You will need 15 x (4mm x 8mm cylindrical neodymium) magnets in total.

The jet pack is hollow with a door on the inside so you can add thruster lights and soundboard and has also been pre-cut and strategically separated so you can print on smaller beds.

The Westar 35 Blaster Pistol comes as a solid version or in seperate parts to reduce masking so you can print and paint all the chrome bits and black parts separately and construct.

The right shoulder bell comes in 3 versions; Original, With Mythosaur emblem and with the Mythosaur emblem seperate for higher detail printing.

Fully articulated rangefinder on our already popular and highly accurate Bo-Katan helmet.

Exceptional detail on all armour pieces and sized for the average female build.

Parts included are:

HELMET

• Back grill

• Helmet

• Left ear lower

• Left ear upper

• RF acrylic

• RF camera

• RF Head

• RF Stalk

• Right Ear lower

• Right Ear Outer

• Right Ear Upper

ARMOUR

• Abdomen

• Back Plate

• Chest Plate

• Belt

• Collar Left/Right (Print x 2)

• Groin Plate

• Headband

• Jetpack - Antenna, Cover, Exhaust, Left, Right, Main, Shroud, Top centre and Top Sides.

• Knee Left/Right (Print x 2)

• Left Forearm - Inner, Outer, Whistling Birds, Keypad

• Right Forearm - Inner, Outer, Antenna 1, 2, 3, Blade, Blade Block, Blade Button, Cover

• Hand Plates Left/Right (Print x 2)

• Shoulder - Left, Right, Right with Mythosaur Emblem, Right for Mythosaur Emblem, Mythosaur Emblem. (Print x2)

• Shins Left/Right (Print x2)

• Thighs Left/Right (Print x2)

WESTAR 35 BLASTER PISTOL (Print x2 )

• Barrel

• Handle

• Magazine

• Muzzle

• Rear

• Safety Lever 1, 2 (Print x2)

• Trigger Guard 1, 2

• Trigger

We are extremely proud of this Armour!