ARRMA FELONY 6S FRONT AIR DAM AND ACCESSORIES 3D print model

The arrma felony 6s body left something to be desired.. I have spent some time to come up with some body mods that i feel are a great compliment...

This set of files covers the front air dam, with grille, 5mm led light buckets, and led retainers.. the retainers are held in with 2mm x6mm button head screws or similar..

Minimum Bed size required to print in one solid piece is 300mm x 300mm ... If using a smaller build platform similar to the ender 3 (210mm x 210mm) the air dam should be printed in 2 pieces, and glued together..

My print settings are as follows

.15 layer hieght 2mm wall thickness 8% infill, grid setting 4 bottom layers 10 top layers .2 Z support clearance 50mm sec. inner walls 30mm sec outer walls

Led buckets can be printed on thier back or face.. I prefer to set them up on thier back, but either way will work...

You will need to print 2) of the following; led retainer

Items can be printed in any material from pla, abs, petg, asa, nylon etc.

I hope this is found useful for my fellow rc enthusiast's...