Pablolito83
Do you need to put more weight on the hull to balance the boat correctly or the 3000mah battery do the job ?
Useto navigate. Pressescto quit
3D PRINTED RC PATROL JET BOAT 3D print model
Description
This rc boat is a boat that can be used as a patrol boat, sar boat and pilot boat,
This boat is a replica of the Palfinger Marine PB 1500 modelInclude :
- List of Materials
- Assembly instruction :
In this boat i use :
- 3536 1200kv motor brushless (x2)
- ESC 50 amp (x2)
- Servo MG 996R (I hope you are using a waterproof servo)
- 3S Lipo battery 3000mAh (bigger capacity would be better)
Length hull : 85 cmScale 1:17,65
Demo Video :
Instagram ---------------------------------------------------
https://www.instagram.com/reel/CuTY6laopzv/?igshid=YmM0MjE2YWMzOA==
https://www.instagram.com/reel/CtJizgxILbO/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
https://www.instagram.com/reel/CuFeyHJom7f/?igshid=MzRlODBiNWFlZA==
https://www.instagram.com/reel/CuE3nelIoG2/?igshid=MzRlODBiNWFlZA==
Youtube - ----------------------------------------------------https://youtu.be/rm48V82XIgo
Test File (the large part):
https://drive.google.com/drive/folders/11pkpJx0rwMki7SkRsvI-TlTN-I-YE8kr?usp=sharing
available hulls with jets and without jets are provided for your best jet
You'll need sanding, apply putty, and painting the hull for better results
Happy printing :)
3D PRINTING SETTINGSI use Standard Ender 3 Pro V2 machine
build volume : 235x235x250
if your default printer setting is 220x220x250, we can change it in manage printer - machine settings, change the value from 220x220x250 to 235x235x250
ariffadillah
I don't need to add another weight, just adjust the battery position for balance. By the way 3300 mah battery only lasts 5 to 10 minutes
Pablolito83
Alright thanks !
L
2023-07-20 19:33:33 UTClambert-michaelm
Do you have any issues with water getting into the rear hatches on the flat deck?
ariffadillah
yes, I have the same problem, but I have coated it with epoxy glue, but there is still a little water coming in, it comes from the shaft jet, my grease is not good.
have you finished building it?
B
bellstephen8
I had a few print issues but perhaps the upgrade has now fixed these, I will check.
I certainly have done a lot of sanding and filling but will soon be able to finish glueing it together, then painting it all.
Looking forward to slipping her into the water!
M
modelshipattic
Nice design, prints very well. Looking forward to take it out for a ride.
M
marcgeyskens
Nice design
3D PRINTED RC PATROL JET BOAT
Custom License
3D PRINTED RC PATROL JET BOAT
Custom License
3D Model formats
Format limitations
- 3D Manufacturing File (.3mf)155 MB
- Stereolithography (.stl)155 MB
- PDF (.pdf)155 MB
3D Model details
- Publish date2023-06-11
- Model ID#4563764
- Ready for 3D Printing
Similar Models
to 3D PRINTED RC PATROL JET BOAT
