1-72nd Titanic - PART 5 - MUST READ DESCRIPTION 3D print model

This is the 5th piece to print and build the giant 1/72nd RMS Titanic model. You will need to purchase and print all other files to complete the project as you go.

You will require a 3d printer with a minimum build volume of 300mm wide, 300mm deep, and 400mm tall.

This part does not require support structure.Recommend 3x shell layering with 15% infill, and a 0.8mm nozzle with 0.3mm layer height.

All STL files with an M in the name are to be printed twice (the second to be mirrored in your slicer along the X or Y axis).Assembly is pretty straightforward if you purchase and print each component in order. Instructions will be uploaded at the end.Only dry-fit the model together until all components have been printed.

Happy to help answer any questions along your build, but I only get online once every few months.

Hope you enjoy this build!Bernie