Throttle Pitch Mixture lever mechanism for Flight Sim 3D print
Throttle Pitch Mixture lever mechanism for Flight Sim 3D print 3D print model
  • Throttle Pitch Mixture lever mechanism for Flight Sim 3D print 3D print model_0
  • Throttle Pitch Mixture lever mechanism for Flight Sim 3D print 3D print model_1
  • Throttle Pitch Mixture lever mechanism for Flight Sim 3D print 3D print model_2
  • Throttle Pitch Mixture lever mechanism for Flight Sim 3D print 3D print model_3
  • Throttle Pitch Mixture lever mechanism for Flight Sim 3D print 3D print model_4
  • Throttle Pitch Mixture lever mechanism for Flight Sim 3D print 3D print model_5
1 / 6
Useto navigate. Pressescto quit

Throttle Pitch Mixture lever mechanism for Flight Sim 3D print 3D print model

Description

3D Printable levers (throttle, rpm, mixture) DYI for home built flight simulator for 6 levers but if you need for 3 you can request it free :)

Dimensions : 226mm, 84,57mm, 100.20mm

*NOTE: * works with potenciometers, requires a threaded shaft of 8 mm in diameter with nuts and 12 small screws with nuts

Recommended print settings: Infill - 35% Wall count - 4 (0.4mm nozzle) Top & Bottom layers - 4 Layer height - 0.2mm Supports - enabled

Write comment
F
facundoaldax
facundoaldax2020-04-16 02:48:29 UTC
Qué tal me interesa ver un video en funcionamiento!! Es posible? Es robusto??? Gracias
3
3DBITS
3DBITS2020-04-16 03:20:53 UTC
Sure, I have one of the first test about the free movement, let me try add it here in the post of the 3d print file
3
3DBITS
3DBITS2020-04-16 04:06:42 UTC
Ready, you can check it
3
3DBITS
3DBITS2020-04-16 04:06:44 UTC
Ready, you can check it
3
3DBITS
3DBITS2020-04-07 20:00:50 UTC
dejaron un mal comentario respecto a la pieza, cabe mencionar que la pregunta la hizo durante la noche y al dia siguiente durante el dia publico su mala review, est misma pieza yo la estoy ocupando en mi simulador un baron 58 y funciona muy bien, si requieren algun video o tienen duda primero hagan una pregunta antes de comprar, gracias y les agradeceria su confianza
Item rating
0 1
M
maramberri
maramberri2020-03-29 15:43:51 UTC
Not Recommended
Ask for some video to see how it works, and no response. I guess why he not put a video, it dont work. Its hard to assembly. Gears are to big and the movements are not smooth, and the range of movement is too short.. about 45 grades.
Throttle Pitch Mixture lever mechanism for Flight Sim 3D print
$59.29
 
Editorial No Ai License 
Throttle Pitch Mixture lever mechanism for Flight Sim 3D print
$59.29
 
Editorial No Ai License 
3
3DBITS
(1 reviews)
Response 100% in 1.7h
3D Print Modeling

3D Model formats

Format limitations
  • Stereolithography (.stl) (5 files)3.51 MB

3D Model details

  • Ready for 3D Printing
  • Publish date2019-06-29
  • Model ID#2024268

Similar Models

to Throttle Pitch Mixture lever mechanism for Flight Sim 3D print

Users who bought this item also bought...

Chat