MTB FORK STEERER PLUG - Extend possibility of your fork
MTB FORK STEERER PLUG - Extend possibility of your fork 3D print model
  • MTB FORK STEERER PLUG - Extend possibility of your fork 3D print model_0
  • MTB FORK STEERER PLUG - Extend possibility of your fork 3D print model_1
  • MTB FORK STEERER PLUG - Extend possibility of your fork 3D print model_2
  • MTB FORK STEERER PLUG - Extend possibility of your fork 3D print model_3
  • MTB FORK STEERER PLUG - Extend possibility of your fork 3D print model_4
1 / 5
Useto navigate. Pressescto quit

MTB FORK STEERER PLUG - Extend possibility of your fork 3D print model

Description

Threaded plug/cup/clutch for tapered forks RockShox, FOX.Diameter of hole = Ø 33,5-34mm

Extend the possibility of your fork.Additional storage for your tools, snack, cash, GPS tags...

Im using it for bike pump LEZYNE POCKET DRIVE PRO with dimensios:L=141.3mm,Ø 23mm

INSTALLATION

  • Print the parts
  • Clean the fork steerer hole (I used Isopropyl alcohol to remove all grease/dirt from inside
  • Screw the cup to threaded insert
  • Insert it into the fork steerer hole
  • Use plastic hammer to insert plug into the hole (its a tight fit)
  • DONE, you can then unscrew the cup and use your new secret place :)

Threaded plug works perfectly - TESTEDWeight: 10g

Write comment
Item rating
0 0
MTB FORK STEERER PLUG - Extend possibility of your fork
$5.00
 
Royalty Free License 
MTB FORK STEERER PLUG - Extend possibility of your fork
$5.00
 
Royalty Free License 
IIDM3d
IDM3d
(0 reviews)
Response 67% in 82.0h
3D Print Modeling
Rendering

3D Model formats

Format limitations
  • Stereolithography (.stl)9.43 MB
  • Other 12.3 MB

3D Model details

  • Publish date2024-10-14
  • Model ID#4983141
  • Ready for 3D Printing

Similar Models

to MTB FORK STEERER PLUG - Extend possibility of your fork
Chat