M72 LAW Rocket Launcher 3D print model

A 1:1 prop of one of the most widely used, easily carriable anti-tank weapons in the world. This is an extending and contracting prop with pop up sights (if you build it to specs). You will have to supply your own 3/8x 3/8 Aluminum Channel (available at a hardware store) and a few other parts.Springs, sheet metal, square tubing, straps, and square rings will need to be purchased if you want to make this ultra realistic with sealing caps.Included are graphics for the side which you need to print off. Instructions are included.The tubes are designed to accommodate pins so that getting an exact fit is easy. The largest part is 199mm long, so this can be printed on most PLA printers. There are a few parts that would benefit from being printed on a resin printer for more authenticity.This is an almost identical replica of the prop used in the movies, Stripes, Invasion USA, Beverly Hills Cop 2 and many other movies.Look for my M72 A7, a more modern version. which is similar to the prop in Terminator - Dark Fate.

This model contains a LOT of parts and is NOT a one-piece model. Its not one of those models you just print and glue together. Post processing will be necessary. You may be able to subdivide the model for smaller printers using Meshmixer or other software but that is your responsibility. It may not be printable on 3d belt printers. If you have a question, Message me.

This is a prop. NOT A FIREARM. It cannot be made into a real weapon. An airsoft or paintball conversion may be possible, however this was not initially designed for that purpose.