Aircraft control yoke for flight simulator

Aircraft control yoke for flight simulator 3D print model

Description

3D printable full size aircraft control yoke for home built flight simulator.

Dimensions: 134mm H x 267mm W x 76mm D

NOTE: Printer build area needs to be bigger than above stated dimensions Supports may be required depending on 3D printer's capabilities. Recommended print settings: For 0.4 mm nozzle 0.2 mm layer hight 3 or 4 perimeters at least (more will result in stronger part) 25 to 30 % infill at least (more will result in stronger part) 4 top and bottom layers at least Recommend PLA for printing

Item rating
0 2
J
jmperou 2023-12-06 19:10:02 UTC
Not Recommended
As the last person mentioned, neither of the 2 pieces lays flat on the bed. Also there are simple floating horizontal faces which could easily be rectified with chamfers or fillets. Both of these problems are easily solvable. Will try to get a refund for my purchase.
T
tmasimparts 2019-01-12 02:39:12 UTC
Not Recommended
the piece does not come level with the bed, it has sectors where the layer does not support and by several layers that it gives in the air. the measurement is not correct, not recommended
Aircraft control yoke for flight simulator
$26.00
 
Editorial No Ai License 
Aircraft control yoke for flight simulator
$26.00
 
Editorial No Ai License 
Response 73% in 3.8h

3D Model formats

Format limitations
  • Stereolithography (.stl) (2 files)84.1 MB

3D Model details

  • Publish date2018-04-22
  • Model ID#886817
  • Ready for 3D Printing
Help
Chat