Foredom H-30 handpiece table clamp set. STL

• Items needed:

• 2 x M6 nut

• 1 x M6 threaded stud 65mm long, (for thumb knob 1)

• 1 x M6 threaded stud 40mm long, (for thumb knob 2)

• 1 x 12mm diameter rod cut length requirements.

• Cyanoacrylate adhesive or epoxy

Assembly instructions:

Glue inplace M6 nut, one onto table clamp, and other onto handpiece clamp.Glue inplace threaded stud into thumb knobs 1 and 2.Glue inplace 12mm steel rod into handpiece clamp.

• Print setting min 40% infill, print as orientation in image 3 & 4 for maximum strength.