Beechcraft King Air Yoke V1 3D print model

3D Printable Beechcraft King Air Yoke for flight simulator.

Dimensions : 320mm W 145mm H 100mm DPilot and Co-Pilot side yokes includedDivided into 4 partsRequires hardware for assembly : (3mm self tapping screws + M3 machine screws & nuts)Fits onto a 20mm shaftPrint bed size required : 160mm x 140mm*Make sure part are orientated correctly before printing.*Buttons and switches not included in stl filesRecommended print settings:Using a 0.4mm nozzle0.2 mm layer height.At least 8 top and bottom layers.At least 4 perimeters At least 30% infill.No support material is needed when printed using the recommended print settings.