Walther Monotec LG400 Grip Voronoi 3D print model

• Size M (same size as original Monotec M Grip)
• Right Handed
• Voronoi Design
• Extremely lightweight (around 80g)
• Hollow side design - better rifle proximity
• Reinforced structure
• Innovative grip texture
• Ready made to install (install same as original)*

For any other sizes contact us at info@aesthetic.si - we can also create custom designs and personalized projects

Rifle compatibility:

• Walther LG400
• Walther Monotec
• Walther Anatomic
• other Walthers with same mounting

PRINT SETTINGS:We use Ultimaker Cura for our slicer.If you print from top to bottom minimal support is needed.Use high infill % to insure strength.We use Ultimaker Cura.OUR SETTINGS (can be changed to preference):

• Layer Height: 0.2mm
• Line Width: 0.4mm
• Infill Density: 70% or more
• Infill Pattern: Honeycomb
• Print speed: 50mm/sSUPPORT
• Support: YES
• Support Structure: Normal
• Support Placement: Touching Buildplate
• Support Overhang Angle: Under 85°
• Support Pattern: LinesBUILD ADHESION
• Build Plate Adhesion Type: Brim
• Brim Line Count: 4
• Brim Location: Outside Only*Honeycomb pattern is an Ultimaker plugin.

*Mounting is the DIY part of the design, we can help with the process, but take no responsibility, to avoid this part you can get the finished product from our website

ALL AΣ designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of our designs without our explicit written consent. Learn more in Section 18 of our TOS Disclaimer https://aesthetic.si/tos.html. By default, a Private Use license is applied to all designs aswell.