TIKI IDOL 3D print model

Tiki tap handle for a beer keg.

The bottom is threaded to screw directly onto the standard 3/8" - 16 UNC threads...however if you want stronger use a threaded insert, link below.I try to minimize support material, so this is split into a front and rear. Assemble them with construction adhesive and 6-32 flat head screws.

Finally, you can optionally hand paint, as I did mine.

*** YOU CAN ALSO USE IT AS A DECORATIVE OBJECT IN YOUR HOME OR OFFICE.

Link: https://www.amazon.com/Z-Threaded-Insert-Internal-Threads/dp/B0026GZU0Q/ref=sr_1_13?crid=1QZ2PLV2KVFUA&keywords=3%2F8-16+unc+female&qid=1661083994&sprefix=3%2F8-16+unc+female%2Caps%2C73&sr=8-13

3D PRINTING SETTINGS

Most common print material PLAPress Temperature 205 degreesMost common print speed 30-40mm/sFastest print speed 100 mm/sMost common layer hight 0.2-0.3mmTravel speed 100 mm/sNozzle size 0.4Aluminum bedBed temp 60 degrees

YOU CAN ALSO PRINT IN THE DIMENSIONS YOU WANT IN THE SLICING PROGRAM YOU USE.