Cable Management Brackets 3D print model

These are brackets designed for under baseboard to support cables for model railway/railroad But can be used for many other domestic and hobby uses.These have been designed to be printed on Resin or filament printers.They have also been designed to be fitted before or after installing wires.

I have designed them for my model railway to help clean up all the messy wires that I have handled and that are not very well supported.

Brackets 1 and 2 have been designed to take up to 2.4mm Diameter cables. Bracket 3 and 4 holes are 11.5mm x 7mmThe cable representations in the pictures are 1.9mm diameter cables.Mounting holes are designed for 4mm diameter screws, hole diameter 4.3mm.

If you like my designs then please would you support me through my Patreon account - https://www.patreon.com/PJD1974, any money raised helps me research, design, and develop new items for me to share. For £2 a month, you will give me basic support and for £4 you will get insight into my new designs and be able to contribute to my future projects.

Please also check out my Website https://sites.google.com/view/pete3dprintinghelp/home