Texture Roll 65 One Piece Positive - Fondant Decoration Maker 3D print model

Texture Roll - Decoration MakerTexture Maker - Roller with Infinite texture.

Pre-Sized at: 180x30x30mmOn my profile, there are more rollers for different themes

Remember to resize it as you need, in case you work with candy, ciment, clays, etc - you can resize as you prefer and as fits your needs.You can paint the printed object, but be aware that depending on the ink you use, it may cover some details.

Important: the positive figures on the roll, generates a negative figure on clay.the negative figures on the roll, generates positive figures on clay.Its always inverted the figures in you see in the roll with the figures generated in the applied final material.

I would suggest not painting it.

the photos in the images are just to demonstrate how it works, it was made with a different roller, but the one you are purchasing is the one from the first photo.The roller in the printed photos is not included.

Easy Printing (one side is full flat, other has little differences in volume)No Support Required (may depend on your printer, but on my tests it worked without)

Used this Cura settings on my Ender 3 Pro, printing in PLA:-Dynamic Quality: 0.16mm-Printing Temperature: 200-Build Plate Temperature: 70-Speed: 35 mm/s-Build Plate Adhesion Type: Brim-Infill: 15-20% (the higher you use, the more resistance you'll have, but had a great result with 20)But feel free to change and use the settings you prefer.Didn't test it on a resin printer, or in ABS.

Some of the rollers could work better if printed with resin, due to the amount of details.

How does it work: just press the cylindrical texture roller against the material you want to apply the texture, and just roll it over and over to create an infinite texture.