SD - MicroSD Card Holder 3D print model

3D MODEL DESCRIPTIONHello friend, today I brought something that may interest you, I made a multi-level memory card holder, I realized the base where to insert 12 microsds, and the central part with 5 SD, obviously of central parts you can print as many as you want, because as I said before, it is multilevel.

The only media you should use, they’re just for the middle piece, use them as I show them in the picture, and you’ll never have problems removing them.

You can print the logo in the color you like, and then apply it with glue.

Another tip I want to give you, follow my settings, find the picture of the settings in the gallery, you can use for all my projects, changing from time to time only the fill, layers and media, the rest you will get perfect prints.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that’s right for you, I’ll also remind you to leave me a like if you appreciate my work.

Good press friend

3D PRINTING SETTINGSLayer 0.20Temp 205° / 50°Infill 10%Top and Bottom Layer 4Perimeter Layer 3Support Yes View PicturesSpeed 50/60 mm/s