Resin Vat Drainer Stand 3D print model

File: VatDrainer.STLName: Resin Vat Drainer StandMaterial: 107.67 grams ( 0.237lbs) Infill = 10%Size: 175.2mm (6.898) x 149.8mm (5.898) x 77.8mm (3.063)Resolution: 0.20mmLayers: 370 layersPrint Time: 9 hr 45 minFunction: It's hard to deal with all the chemicals of a resin printer particularly since the resin is so viscous (viscious). This model is the base and the top of drain stand for the Mars Elegoo and Anycubic vats to return resin to the bottle. You need to print these 1:1. You will also need a 9 long (or however tall your tallest bottle is) aluminum extrusion commonly known as 80/20 that is 1x1 (McMaster-Carr part number 47065T101 or equiavlent) and have both ends tapped for #1/4-20 x 1" or M6x25 flat head screws. Good Luck!

Meta Keywords: Resin Vat Drainer Stand Printer Mars Elegoo Anycubic