3D MODEL DESCRIPTIONHello friend, today on my profile I wanted to bring a new organizer, different from the others I published.

The organizer has blocks, compared to others is convenient, because you can modulate it to your liking, horizontally or vertically, or as you like.

The dimensions of the box are 100 x 100 x 120 depth, and each drawer, has compartments to be able to insert, pins, bolts, washers, diodes, resistors, usb sticks, memory cards, or other material that you consider essential to separate. Each container is different from the other, you can print what you need.

The depth of the container is 40mm, large enough for any use.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that’s right for you, I’ll also remind you to leave me a like if you appreciate my work.

Good press friend

3D PRINTING SETTINGSLayer 0.20Temp 205° / 50°Infill 10%Top and Bottom Layer 4Perimeter Layer 3Support View PicturesSpeed 50/60 mm/s