Cookie Mould 11 - Biscuit Silicon Molding 3D print model

Cookie Mould - Biscuit Silicon Molding 05 files included in this pack, as shown in second image: Base Model, x1 Negative, x1 Positive, x6 Negative, x6 Positive.

The base model is used for a example printing. The negative pieces can be used as molds itself. The positive pieces can be used to create silicon molds, by filling.

There are the pre-set sizes: Final Candy Size: 45x45x4mm Total size of x6 Negative piece: 157x104x9mm

Remember to resize it as you need,you can resize as you prefer and as fits your needs. IMPORTANT: if you use the 3d printed model directly for cookie modeling, be aware if the material you use can have contact with foods, if they not toxic.

Easy Printing (one side is full flat, other has little differences in volume) No Support Required

I would highly recommend printing in Resin, if you want all the details to look perfectly, but you can always try on PLA.

Didn't test print it, but if I did, I would use this Cura settings on my Ender 3 Pro, printing in PLA: -Dynamic Quality: 0.16mm (or 0.12mm) -Printing Temperature: 200 (230 for V-Silk) -Build Plate Temperature: 70 -Speed: 35 mm/s -Build Plate Adhesion Type: Brim But feel free to change and use the settings you prefer.