Cookie Cutter Biscuit Mold 02 - Rose Leaf 3D print model

Update: added a second version STL, which is higher (10mm height)

Cookie Cutter Biscuit Mold 02 - Rose LeafAutumn Leaf - Cookie Cutter Biscuit MoldCookie/Biscuit Cutter - Mold for Artesan or Kitchen uses.

Pre-Sized at: 80x54x5.5mmOn my profile, there are more cutters

Remember to resize it as you need, in case you work with candy, ciment, clays, etc - you can resize as you prefer and as fits your needs.

Important: Be aware of the material used to print in case you use it in cookingAlso, if you choose to print the model for selling - be aware of the ink you use in case its used for cooking.

I would suggest not painting it.

Easy Printing (one side is full flat, other has little differences in volume)No Support Required

Used this Cura settings on my Ender 3 Pro, printing in PLA:-Dynamic Quality: 0.16mm-Printing Temperature: 200-Build Plate Temperature: 70-Speed: 35 mm/s-Build Plate Adhesion Type: BrimBut feel free to change and use the settings you prefer.

Didn't test it on a resin printer, or in ABS.

How does it work: just press the cutter against the material you want to apply the molding, the size walls will cute the biscuit/cookie, and the inner walls will just mark it as a draw.