ODISS BOX SBS - VAPE MECH MOD 3D print model

Inspired by BOXER I decided to create something similar as I do like the design. It is fully mechanical, optionally a charger board can be used (2 body files available). The name ODISS I took from the name of my native city Odessa. Enjoy!

Specs: H 75.0mm W 30.0mm D 53.0mm Cage diameter 25.0mm, cage height 35.0mm Battery 1x18650

Materials used: -PETG MATT from Spectrum filaments (black and white), -510 connector 22.0mm -stainless steel contact posts, -optional - charging board TP4056 USB type-c (22.0mmx17.0mm)

Some issues on the photo is due to my printer setting or even due to the printer itself, as I use FB Aone 2, so no worries, if you have decent 3d printer the mod will come out excellent!

I used 100% infill, 20-80mm/sec speed, supports for insides are mandatory. The whole print took approx 7 hours. As said above - I used PETG which appeared quite good material for such mod, no any issues. Anyway, you can use whatever material you like, except for PLA maybe)