Convert your Geeetech A10 from a bowden to a direct drive. This housing is designed with two side cooling fans and one front nozzle cooling fan for enhanced cooling onto the hot end. Relocate the stepper motor to create a direct drive for material such as flexibles. Designed to use the rail mount for mounting to the printer. This design will require a small metal plate for moutning hot ends. Holes are pre-determined for over head mounting for the adapter plate needed.

All wires are to be ran through the back of the housing and thru the top to keep away from the rail and wheels.

Rewiring is a must along with extending a few wires, but very easy to do. These wire are for the run out sensor and drive motor.