Cool3Axis Eleksmaker Benbox 3D print model

This is a case to cool the 3 Axis eleksmaker Board in Version 5.2.It cools the electronics via 12V connector and blows directly onto the stepper drivers and the heatsinks.If you have any questions or need other cooling cases feel free to contact me, I will react as soon as possible.

You need:

1 40x40x10mm Fan4 3x6mm Screws (to mount the board)2 5x8mm Screw from the spare Parts (to mount everything to thealuminium profile)

Notice you need the big button shown in picture 3 otherwise the printed button will not work.